How much can a Dallas-Fort Worth manufacturing facility save on energy?

For a manufacturing site running 500,000+ kWh/month at prevailing ERCOT commercial rates near 8.2¢/kWh, a blended 31% reduction is roughly $152,520 a year. That is an illustrative figure from typical usage, not a quote — the real number comes out of your interval data and your position on Oncor's rate schedules.

Why does the Dallas-Fort Worth market matter for manufacturing operations specifically?

Manufacturing facilities run a 24/7 baseload with peak production hours load of about 500,000+ kWh/month. In ERCOT North load zone, that shape determines your capacity obligation and your exposure to demand charges — both set by behaviour during a small number of peak hours rather than by total consumption. Two manufacturing sites with identical annual usage can pay materially different amounts here purely on load shape.

How do you buy electricity for a manufacturing facility in Dallas-Fort Worth?

Dallas-Fort Worth is Oncor territory inside ERCOT North load zone. Oncor delivers the power and maintains the wires whoever supplies it, so competitive supply carries no reliability consequence — only a lower price.

What rate schedule fits a manufacturing facility on Oncor?

Most manufacturing sites at 500,000+ kWh/month land on Secondary Service Greater Than 10 kW or above, but service voltage and billed demand decide it, not sector. We verify the classification against the bill before recommending anything, because a schedule change costs nothing and sometimes outperforms a supply contract.

Do you work with manufacturing businesses across the whole Dallas-Fort Worth?

Yes — the full Oncor territory, covering Dallas, Tarrant, Collin, Denton, Rockwall Counties. Deep ERCOT market expertise with dedicated Texas-based procurement specialists.

Manufacturing Energy in Dallas-Fort Worth

ERCOT North · Oncor

Manufacturing Load in Dallas-Fort Worth

Oncor is the wires company for most of North Texas — it reads your meter and delivers the power, while supply comes from whichever retail provider wins your business. The ERCOT North zone is where the state's data center and corporate campus growth has concentrated, and that has a specific consequence for buyers: four-coincident-peak transmission charges are set by your demand during the four summer monthly system peaks, so a single bad afternoon in August can set a cost you carry for the following year. Managing that window is usually worth more here than shaving a tenth of a cent off the energy rate.

Manufacturing is not the dominant sector in this territory, where corporate campuses, data centers, distribution and a deep light-manufacturing base carry most of the commercial load. That is an advantage worth using: a manufacturing load is unfamiliar enough locally that it is routinely priced off generic assumptions rather than off your actual usage. A 24/7 baseload with peak production hours profile at 500,000+ kWh/month is the specific thing we take to market, and the contract structure follows from it: fixed, indexed, or block-and-index, sized to your actual baseload rather than to a nameplate figure.

Rate Schedules

Where Manufacturing Load Sits on Oncor

At 500,000+ kWh/month, most manufacturing sites are demand-metered — which means the schedule, not just the rate, drives the bill.

Commercial rate schedules you will typically see on a Oncor bill
Schedule	Typically covers
Secondary Service Less Than 10 kW	small commercial accounts
Secondary Service Greater Than 10 kW	the bulk of mid-size commercial load
Primary Service	campuses and large single-site facilities
Transmission Service	industrial sites at transmission voltage

Schedule names, demand thresholds and eligibility rules change with each rate case, and the schedule an account was originally placed on is frequently no longer the one that fits it. We verify yours against the actual bill rather than assuming — that check is free, and it is where a meaningful share of the savings on this page comes from.

Full-Service Energy Management